Focus on pressure vessel R&D and production22year

Global sales network

Current position: Home » News » Industry Information » Specific provisions for material substitution

产品中心

PRODUCTS CENTER

Classified by standard
GB150 Standard Storage Tank ASME Standard Storage Tank PED Standard Storage Tank
Classified By Material
Stainless Steel Storage Tank Carbon Steel Storage Tank Lined Stainless Steel Storage
Classified By Inspection
Exempted Storage Tank Need To Check The Storage Tank
Classified By Pressure
Low Pressure Storage Tank Medium Pressure Storage Tank High Pressure Storage Tank
Classified By Appearance
Vertical Storage Tank Horizontal Dtorage Tank Air Bag/Cylinder
Classified By Media
Air Storage Tank Steam Storage Tank Nitrogen Storage Tank Oxygen Storage Tank Water Tank Vacuum Tank

Service Hotline:

If you have any questions about our products and services, please contact with us in as following way:
7*24 hour hotline service

0532-66997208

Specific provisions for material substitution

Release time:2018-09-05  Browse:410
Specifications for material substitution are often difficult or difficult to consider in the design and manufacture of equipment. And analysis, material substitution is widely used in the design of pressure vessels. The "Safety Technical Supervision Regulations for Stationary Pressure Vessels" has clearly defined the substitution of pressure vessel materials. In its design and manufacture, the main requirement is to select not only the materials of the pressure-bearing components of the pressure vessel but also the materials to be replaced. The shape quality is similar, and the chemical composition, size standard, performance index and monitoring method of the material should be fully considered for reasonable substitution. The most basic principle of material substitution is to eliminate the application of various indicators that do not meet the standard materials in the substitution, strictly ensure the quality of the materials and achieve absolute guarantee, the technical requirements of the technical substitute materials can not be lower than the substitute materials, and can pass many Material selection methods are used to test and test materials.
The procedure for material substitution is:
(1) The substitution of the pressure-bearing parts of the container shall be strictly carried out, and the re-inspection report or quality of the substitute materials shall be submitted and approved by the technical department of the substitute unit. Proof that the person in charge of the approval approves the approval;
(2) The material substitution must be made at the time of manufacture of the pressure vessel after obtaining the permission of the original design unit and obtaining the supporting documents; Span>
(3) The design, construction drawings and quality certificate of the pressure vessel should be carefully marked with the specification parts, materials and specifications of the substitute materials. .