Can the screw machine air tank not be used? You may still have lost it
Release time：2018-11-14 Browse：429
If someone asks you Air compressor gas storage tank, do you always feel that it is difficult to express in words, or only can be intended, can not be said. how could be! That's because we generally know that we don't know the other ones. The role of gas storage tanks is much better!
First introduce the basic common sense function: store air to meet the sudden increase in gas consumption of gas equipment; eliminate the pulsation of airflow in the pipeline Initially cool the air to allow a portion of the liquid to settle out. Therefore, the gas storage tank should be drained regularly; the air compressor can be automatically shut down. Under the set pressure, the gas storage tank will automatically stop when it is full of air compressors, so that the air compressor will not run until the air compressor is running.
In theory, the larger the gas tank, the better, the number of times the air compressor can be started frequently. The start of the star triangle is a power frequency start. The instantaneous current of the motor is about 7 times of the rated current. The damage to the electrical parts of the air compressor is relatively large, which reduces the life of the electrical part and compares the impact on the power grid. Large, affecting the normal use of other electrical equipment. The variable frequency air compressor is a soft start, and the starting current is about twice the rated current, and the effect is not very large.
Recently about air compressor gas storage tanks received a lot of questions from netizens, the following summarizes the potential role of air tanks for air compressor users .
Enthusiastic netizens ask friends questions: Do not use the air compressor of the screw air compressor? The air storage tank at the air compressor outlet can not only stabilize Exhaust pressure, buffering, etc., at the same time, there is an important role that the average user will not notice, that is, to prevent the compressed air pipeline from returning to the liquid for some reason during the shutdown of the air compressor, and pouring it into the air compressor, because damage. If the gas tank is removed, the inverted U-bend design should be used in the piping design to perform the same function.
Another function is to cool the dried compressed air again to reduce the moisture content of the compressed air. For individual compressed air systems, such as air compressors with large displacements (such as centrifugal air compressors), the system pipe network is also relatively large (pipe diameter is large and long) and the gas is relatively stable, It may not be equipped with a gas tank. However, general compressed air systems require a gas storage tank.
There is no place for storing compressed air inside the air compressor. Once compressed air is generated, it must be used. This way of working is not ideal, with storage The gas tank can firstly press the compressed air into the gas storage tank to a certain pressure, and then use the air pressure to drop to a certain extent, and the compressor is restarted, which is more ideal in terms of energy utilization angle and compressed air quality. So no gas tank is not enough.
In addition, air compressors are not required for air compressors where the amount of compressed air required is small. However, considering the stability of the air compressor performance, the pressure of the compressed air is constant and the quality is best equipped with a gas storage tank. After the netizen has finished collecting the answers, contact the gas storage tank from different angles of the air compressor.
